Jet Channeling and the Video's Aswan Scoop-Mark Theory

Scoop Marks on Unfinished Obelisk: What Tools were Used? How were they formed?
Source: Scoop Marks on Unfinished Obelisk: What Tools were Used? How were they formed? by Curious Being

Site mentioned

📍 Aswan, Quarry (north)🌍 Show on the globe

Modern jet channeling uses flames at roughly 3,000°F (about 1,650°C) to cut granite, exploiting quartz-bearing stone's thermal properties to cause thermal spalling. Channels can be cut about 6 metres deep. The video compares the 40 cm-wide Aswan scoop marks with typical 10 cm channels and argues that ancient Egyptians may have used an enlarged, torch-like flame tool. Diamond wire sawing has replaced or supplemented jet channeling in some U.S. quarries, although jet channeling remains prevalent at Elberton.

Key facts

  • Jet-channeling flames burn at approximately 3,000°F (about 1,650°C), not 2,500–3,000°C.
  • Jet burner channeling remains the prevailing method at Elberton, so saying it was replaced throughout the United States by diamond wire sawing is too broad.
  • The claim that an enlarged flame tool produced the Aswan scoop marks is the video presenter's hypothesis, not an established finding attributed to researchers.

Related stories

Sources

link.springer.com
Linked in video description
link.springer.com
Linked in video description
nature.com
Linked in video description
old.capeannmuseum.org
Linked in video description
Manufacturing Process - Granitemccannongranite.com
Granite is cut from the "bed" of the quarry with a jet piercing machine that produces a flame burning at approximately 3,000 degrees Fahrenheit. This high ...
JET STIK 48" Stoneworking Flame Tooleasternmarble.com
Combining high thermal energy with high velocity kinetic energy, the JET STIK removes material rapidly without overheating, fracturing, or fusing the stone.
Elberton Granite - The Quarrying and Manufacturing Processquarriesandbeyond.org
These techniques include jet burner channeling, diamond wire sawing, and drilling-blasting. Currently, the prevailing method is jet burner channeling. The ...
Jet channeling granite | Newstimesargus.com
It directed a 3,000 degree flame of high-pressure fuel oil and oxygen against the granite, causing spalling (flaking off) of the granite due to ...
Was this story useful?

← All stories

Keep exploring

Every site on this page sits on the globe, and the people who research them are on the Discord.

3D Globe · Sites by country · Story Archive · Research Library · Weekly Journal · Search

AI-generated text · images from the original sources · always verify with the sources.